Record Power Mini Chuck and Jaw Collection
This collection includes the following (5) items;
SC2 2.5" Mini Chuck, Dome Jaws for Mini Chuck, Pin Jaws for Mini Chuck, Pin Jaws for Mini Chuck, Mini Faceplate Ring.
1. SC2 2.5" Mini ChuckThe SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1.
These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface.
SC2
Contraction Spigot: 4 - 25.5 mm
Contraction Square: 4 - 25.5 mm
Another of the most popular jaws for full size chucks – these are also ideal for smaller chuck projects too. We have set the range of these bodies to be compatible with most tea light holder designs (on either body) as well as many salt or pepper pot designs and these offer an excellent expansion grip for many projects. The end of the jaw is dovetailed so can be used on its own as a delicate grip – or the jaw can be inserted full length using the back jaw face as a register and providing wall support to prevent the workpiece being knocked from a dovetail only grip. The dovetail at the end provides additional security in expansion mode.
SC2
Expansion: 39.5 - 60 mm
Contraction Spigot: 6 - 26 mm
Contraction Square: 4.5 - 25 mm
4. Pen Jaws for Mini Chuck
These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects, as in addition to their strong grip, the work piece is moved forward from the chuck to allow greater access.
SC2
Contraction Spigot: 14 - 20 mm
Contraction Square: 14 - 26 mm
These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects, as in addition to their strong grip, the work piece is moved forward from the chuck to allow greater access.
SC2
Contraction Spigot: 14 - 20 mm
Contraction Square: 14 - 26 mm
5. Mini Faceplate Ring
This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 40 mm jaw set which comes with both the SC1 and SC2 Mini Chucks.
Diameter: 68 mm