Cart 0
iVAC Contactor, 115Vac Trigger
iVAC Contactor, 115Vac Trigger

iVAC Contactor, 115Vac Trigger

Available in wired (specifically for the Camvacs) or standard versions.

(Complete iVAC set-up HERE)

A heavy duty 3 pole relay housed in an electrical box. Controlled from an iVAC Switch Box or an iVAC Pro Switch S11515NA/S11520NA (not included). Withstands startup currents up to 150A and maintains running current up to 40 Amps. Contacts are rated at up to 600Vac, single or three phase. 

Warning!  You must use a 115 volt Switch with the iVAC Contactor regardless of the operating voltage of your dust collector.

iVAC Contactor Features
  • Control dust collectors up to 10HP.
  • Supplied in a kit format to enable customized installation for specific requirements.
  • All materials are UL approved.
  • Housed in an 8" x 4.2' x 5.5" approved electrical box.
  • Controlled from a 115 volt iVAC Pro Switch or an iVAC Switch Box (part number S115XX-NA).
  • Standard 115Vac control voltage.
  • Supplied with three cable entry clamps and a control cable.

iVAC Contactor Technical Specifications

  • Controls Dust Collectors up to 10HP
  • Surge current: 150 Amps
  • Running Current: 40 Amps
  • 3 pole
  • 600Vac
  • Supplied in kit format to allow customized installation
  • Housing: 8” x 8” x 4” electrical UL approved box
  • Controlled by a 115 volt Pro Switch or an iVAC Switch Box
  • Control voltage: 115Vac
  • Supplied with cable entry clamps and control cable
  • Control cable: 115Vac, 6’long
  • All materials are UL approved

Typical power requirements of commercially available dust collectors

Power Chart1

We recommend the use of the iVAC Contactor for any dust collector operating on 115Vac that is over 1HP, and for any dust collector over 2.0HP operating on 240Vac. Failure to use the iVAC Contactor will result in early failure of the iVAC Pro Switch and may void warranty.

iVAC Contactor technical specifications are subject to change without notice.